Commell HE-875P Manual do Utilizador Página 24

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 56
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 23
HE-875P User’s Manual
-
23-
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable,
because every panel has its own pin assignment, so we do not provide a standard
cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the HE-875P, LCD panel and the backlight inverter
2. Please check the datasheet of the panel to see the voltage of the panel, and set
the jumper JVLCD to +12V, +5V or +3.3V.
3. You would need a LVDS type cable.
4. Connected all of the devices well.
For sample illustrator only
Panel side
Board side
Vista de página 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Comentários a estes Manuais

Sem comentários