Commell LP-180 Manual do Utilizador

LP-180 Pico-ITX User’s Manual 2013/7/29 Version: 1.3

LP-180 User’s Manual -8- Power Requirement DC only +5V input with onboard 2-pin connector Dimension 100 (L) x 72(H) mm Temperature Operating within

LP-180 User’s Manual -9- 1.3 <Mechanical Drawing>

LP-180 User’s Manual -10- W83627DHG-PCRT / DVI / LVDS DDR3 SODIMM 4GB max. 2 x Serial Port PS2 KB/MS Mini card socket Giga LAN 1 x SATA 4 x USB port

LP-180 User’s Manual -11- CN_LPC CN AUDIOCN_USB2 CN_USB1 Chapter 2 <Hardware Setup> 2.1 <Connector Location> CN_SATA CN

LP-180 User’s Manual -12- RJ45 PS2 CRT CN_INV DC_OUT SO-DIMM LP-180

LP-180 User’s Manual -13- JAT 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting JAT AT/ATX Mode Setting JVLCD LCD Pa

LP-180 User’s Manual -14- 2.3 <Connector Reference> 2.3.1 <Internal Connector> Connector Function Remark SO-DIMM 204 -pin DDR3 SO-DIMM

LP-180 User’s Manual -15- 2.4 <Memory Setup> The board provides one 204-pin DDR3 SO-DIMM to support DDR3 1066/1333 memory modules up to 4GB. Onl

LP-180 User’s Manual -16- JAT 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to in

LP-180 User’s Manual -17- 2.6 <SATA Interface> Based on AMD A55E, the board provides one Serial ATAII interfaces with up to 300MB/s of transfer

LP-180 User’s Manual -18- 2.8 <LAN Interface> The board integrates with one Intel 82583V Gigabit Ethernet controller. The Intel® 82583V supports

LP-180 User’s Manual -19- 2.9 <Onboard Display Interface> Based on AMD G-T56N chipset with built-in AMD Radeon HD 6300 series Graphics, the boar

LP-180 User’s Manual -20- 2.9.2 <Digital Display> (LP-180X only) The board provides one 20-pin LVDS connector for 18 bit single channel panel, s

LP-180 User’s Manual -21- Connector: CN_INV Type: 5-pin Inverter power connector Connector model: molex_53261-5pin or compatible Pin Desc

LP-180 User’s Manual -22- To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight powe

LP-180 User’s Manual -23- After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list

LP-180 User’s Manual -24- 2.9.3 <DVI Interface > (LP-180D only) The board also comes with a DVI interface. Supports up to 1920 x 1200 (WUXGA) of

LP-180 User’s Manual -25- CN_AUDIO2 101 92.10 <Onboard Audio Interface> The board provides the onboard high definition audio with Real

LP-180 User’s Manual -26- CN_USB2 CN_USB1 2 102.11 <USB2.0 Interface> Based on AMD A55E FCH, the board provides 4 USB2.0 ports. The USB2.0

LP-180 User’s Manual -27- 2.12 <Serial Port Jumper Setting > The board provides two RS232 serial ports Connector: CN_COM1/2 Type: 20-pin (10 x

LP-180 User’s Manual -1- Copyright Copyright 2012. All rights reserved. This document is copyrighted and all rights are reserved. The information i

LP-180 User’s Manual -28- 2.13 <Power & FAN Connector > The board requires DC input with 2-pin header, the input voltage range is from 5V fo

LP-180 User’s Manual -29- 2.13.2 <Power Output> Connector: DC_OUT Type: 6-pin connector for +5V output Pin Description Pin Description Pin Des

LP-180 User’s Manual -30-

LP-180 User’s Manual -31- 2.14 <Indicator and Switch> The JFRNT provides front control panel of the board, such as power button, reset and beepe

LP-180 User’s Manual -32- (This Page is Left For Blank)

LP-180 User’s Manual -33- Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the system configuration. The Award BIOS in the single

LP-180 User’s Manual -34- (This Page is Left for Blank)

LP-180 User’s Manual -35- Appendix A <I/O Port Pin Assignment> A.1 <SATA Port> Connector: SATA Type: 10-pin header for SATA Port Pin De

LP-180 User’s Manual -36- A.4 <LAN LED Port> Connector: JSPD1 Type: 2-pin header for LAN Speed LED connector RJ45 connector with LED on rear pan

LP-180 User’s Manual -37- Appendix B <Flash BIOS> B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIO

LP-180 User’s Manual -2- Packing List: Please check the package content before you starting using the board. Hardware: LP-180 Pico-ITX Miniboard x 1 C

LP-180 User’s Manual -38- Appendix C <System Resources> C.1 <I/O Port Address Map>

LP-180 User’s Manual -39-

LP-180 User’s Manual -40- C.2 <Memory Address Map >

LP-180 User’s Manual -41-

LP-180 User’s Manual -42- C.3 < System IRQ Resources >

LP-180 User’s Manual -43-

LP-180 User’s Manual -44- Appendix D <Watch Dog timer Setting > The watchdog timer makes the system auto-reset while it stops to work for a peri

LP-180 User’s Manual -45- Appendix E <AMD Hing Definition Audio Device > 1. Copy the CD Driver folder to disk, Ex: C:\ , D:\ … 2. Please choose

LP-180 User’s Manual -46- 9. Install finish (This Page is Left for Blank)

LP-180 User’s Manual -47- Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate

LP-180 User’s Manual -3- Index Chapter 1 <Introduction>...6 1.1 &l

LP-180 User’s Manual -4- A.1 <SATA Port> ... 3

LP-180 User’s Manual -5- (This page is left for blank)

LP-180 User’s Manual -6- Chapter 1 <Introduction> 1.1 <Product Overview> LP-180 is the PICO-ITX miniboard with AMD G-T56N platform, with o

LP-180 User’s Manual -7- 1.2 <Product Specification> General Specification Form Factor PICO-ITX miniboard CPU AMD G-Series T56N Processor 1.65