Commell ME-C79 Manual do Utilizador

ME-C79 Micro ATX Motherboard User’s Manual Edition 1.4 2014/10/09

ME-C79 User’s Manual -5- Chapter 2 <Hardware Setup> 2.1 <Connector Location> CN_12V CN_USB3CN_LPT MINIPCI J

ME-C79 User’s Manual -6- 2.2 <Jumper Location & Reference> Jumper Function JRTC CMOS Operating/Clear Setting JVLCD Panel Voltage Settin

ME-C79 User’s Manual -7- 2.3 <Connector Reference> 2.3.1 <Internal Connectors> Connector Function Remark CPU FCBGA 1364 CPU DDR3-A/

ME-C79 User’s Manual -8- 2.4 <Memory Setup> The board provides 4 x 240-pin DDR3L DIMM to support 1333/1600MHz up to 32GB. Support Non-ECC, unb

ME-C79 User’s Manual -9- 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inapp

ME-C79 User’s Manual -10- 2.6 <Serial ATA Interface> ME-C79 has Four Serial ATA 3 interfaces with RAID function, the transfer rate of the Seri

ME-C79 User’s Manual -11- 2.7 <Ethernet Interface> The board integrates with one Intel® I210-AT Gigabit Ethernet & Intel® I217-LM controll

ME-C79 User’s Manual -12- 2.8 <Onboard Display Interface> Based on Intel Haswell Bridge CPU with built-in HD Graphic, the board provide one DV

ME-C79 User’s Manual -13- 2.8.2 <Internal Display> The board provides one 16-pin CRT and 40-pin LVDS connector for 24-bit single/dual channel

ME-C79 User’s Manual -14- Connector: CN_CRT Connector type: 16-pin header connector (pitch = 2.00mm) Pin Number Assignment Pin Number Assignment

ME-C79 User’s Manual Copyright Copyright 2014, all rights reserved. This document is copyrighted and all rights are reserved. The information in thi

ME-C79 User’s Manual -15- Connector: CN_LVDS Type: onboard 40-pin connector Connector model: E&T 3950-B40C-00R or similar (HIROSE DF13-40DP-

ME-C79 User’s Manual -16- To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight po

ME-C79 User’s Manual -17- After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list below: BIO

ME-C79 User’s Manual -18- 2.9 <Integrated Audio Interface> The board provides the onboard high definition audio with Realtek ALC888 Connector:

ME-C79 User’s Manual -19- 2.10 <USB Interface> ME-C79 integrates two internal USB3.0 ports and four internal USB2.0 ports. The specifications

ME-C79 User’s Manual -20- Connector: CN_USB3 Type: 20-pin (2 x 10) header (pitch = 2.0mm) Pin Description Pin Description 1 VCC 20 NC 2 USB3.0_RX0

ME-C79 User’s Manual -21- 2.11 <Serial Port> The board supports five RS232 serial port and one jumper selectable RS232/422/485 serial ports. The

ME-C79 User’s Manual -22- Connector: COM3/4, 5/6 Type: 20-pin(2 x 10)header pitch = 2.54 x 1.27mm Pin Description Pin Description 1 DCD1 2 RXD1 3

ME-C79 User’s Manual -23- 1 112 12JCSEL1 1 7 JCSEL2 2 8 1 5 2 6 JP1/2 2 1 6 5 JP3/4 8 2 9 1 COM3

ME-C79 User’s Manual -24- 2.12 <Mini PCI Card and mSATA Interface> The board provides one Mini PCI card and one mSATA slot.

ME-C79 User’s Manual Packing List: Please check the package content before you starting using the board. Hardware: ME-C79 Micro ATX motherboard x 1 (

ME-C79 User’s Manual -25- 2.13 <GPIO and SMBUS Interface> The board provides a programmable 8-bit digital I/O interface; you can use this genera

ME-C79 User’s Manual -26- 2.14 <Power Supply and Fan Interface > The ME-C79 needs a standard ATX power supply from with 24-pin ATX connector and

ME-C79 User’s Manual -27- 2.14.2 <Fan connector> The board provides one 4-pin fan connectors supporting smart fan for CPU cooler and one 3-pin c

ME-C79 User’s Manual -28- 2.15 <Switch and Indicator> The JFRNT provides front control panel of the board, such as power button, reset and beepe

ME-C79 User’s Manual -29- Chapter 3 <System Setup> 3.1 <Audio Configuration> The board integrates Intel® QM87 with REALTEK® ALC888 codec.

ME-C79 User’s Manual -30- 3.2 <Display Properties Setting> Based on Intel QM87 with HD Graphic, the board supports two DACs for display device a

ME-C79 User’s Manual -31- 3. This setup options can let you define each device settings. Click Display Settings to setup the monitor for

ME-C79 User’s Manual -32- 3.3 <SATA configuration> SATA Mode: This option can let you select whether the Serial ATA hard drives would work unde

ME-C79 User’s Manual -33- 3.4 <SATA RAID Configuration> The board integrates Intel® QM87 PCH with RAID function for Serial ATA drives, and suppo

ME-C79 User’s Manual -34- When you boot, press <CTRL+I> to enter the RAID configuration menu. If you are installing Windows 7, when the instal

ME-C79 User’s Manual Index Chapter 1 <Introduction>...1 1.1 <Prod

ME-C79 User’s Manual -35- Chapter 4 <BIOS Setup> The motherboard uses the Phoenix BIOS for the system configuration. The Phoenix BIOS in the sin

ME-C79 User’s Manual -36- 8 1 Appendix A <I/O Port Pin Assignment> A.1 <Serial ATA Port> Connector: SATA3 Type: 7-pin wafer connector

ME-C79 User’s Manual -37- Appendix B <Flash BIOS> B.1 <Flash Tool> The board is based on Phoenix BIOS and can be updated easily by the BIO

ME-C79 User’s Manual -38- Appendix C <Programming GPIO’s> The GPIO’can be programmed with the MSDOS debug program using simple IN/OUT commands.

ME-C79 User’s Manual -39- Appendix D <Programming Watchdog Timer > The watchdog timer makes the system auto-reset while it stops to work for a p

ME-C79 User’s Manual -40- Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate

ME-C79 User’s Manual 3.2 <Display Properties Setting>... 30 3.3 <SATA con

ME-C79 User’s Manual -1- Chapter 1 <Introduction> 1.1 <Product Overview> ME-C79 the 4th Generation Intel of Micro ATX motherboard, suppo

ME-C79 User’s Manual -2- 1.2 <Product Specification> General Specification Form Factor Micro ATX motherboard CPU 4th Generation Intel® Core™ i

ME-C79 User’s Manual -3- 1.3 <Mechanical Drawing>

ME-C79 User’s Manual -4- 1.4 <Block Diagram> 4th Generation Intel® Core™ i7, Core™ i5, Core™ i3, Celeron Mobil